Table of contents
| Table of Contents |
|---|
"Bundle and Executeexecute" is a feature that allows to instantiate multiple checklists at the same timefor instantiating several checklists in parallel. This is possible by assigning a checklist template to several test objects and/or users at the same time. This results in several checklists that can be processed simultaneously. Depending on the activated option, there are the following possibilities:
...
...
Instantiation of checklists with different test objects and assignment to different users
...
Instantiation of checklists with one test object and assignment to different users
The number of test objects is freely selectable. Any number of test objects can be selected for which a checklist with the corresponding checklist template is to be started simultaneously. Depending on the activated option, it is also possible to store several users. With the option "Assign multiple checklists", it is also possible to select check object types.For each selected test object and/or user, a separate checklist is started A separate checklist with the same checklist template is started for each selected test object. The created checklists open side by side next to each other and the execution of the checklists is possible.Whether multiple users can be selected depends on the activated option (see below)can be executed.
This feature is also available if checklist templates are restricted to test object types in the template Template settings (Not possible at test object level).
Options:
When setting up this featurefunction, you can choose between three two options:
Starting checklists with different test objects
Always start new checklists
...
: When executing checklists via "Bundle and execute", a new checklist is always started automatically.
Continue existing checklists, if possible
...
: When executing checklists by "Bundle and execute", already existing checklists will be continued, if available. Within this option, both open and closed checklists can be used.
Only assign multiple Checklists
This allows assigning a checklist for several test objects to several persons. A due date and time can be selected.
In addition to selecting individual test objects, test object types can also be selected. This creates a checklist for all underlying test objects. This enables the simultaneous instantiation of very many checklists at once. Attention should be paid to the following:
If more than 100 checklists are assigned, an additional confirmation dialog appears in which the number of checklists must be confirmed.
When all checklists have been assigned, a notification appears that everything worked.
If something failed, a notification appears that not all checklists could be assigned successfully
Instantiation of checklists with different test objects (types) and different users
see Bulk Actions
| Info |
|---|
Key users can activate this feature through the Testify Customer Success Solution Team. For more information, visit Company settings. |
Example: Always start new checklists
...
After assigning the checklists a success message appears and the view gets reset.
| Info |
|---|
For more information on executing checklists, see Execute checklist. Another type of multiple assignment is the feature Bulk Actions with extended options. |
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
This feature cannot be enabled if Offline mode is enabled. |